Refilling the Ink Tanks on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP

Learn how to refill the ink tanks on the HP DeskJet GT 5810 and 5820 printers. To know more about refilling the ink tanks on the HP DeskJet GT 5810 and 5820 printers on our support site: http://support.hp.com/us-en/document/...

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to refill the ink tanks on the HP DeskJet GT 5810 and 5820 printers:
- First, open the ink tank lid.
- Remove the plug from the ink tank you are refilling.
- Place the plug upright to avoid getting ink on any other surface.
- Remove the cap from the ink bottle.
- Slowly pull the seal tab off and place directly in the trash or on a protective material to avoid getting ink on any other surface.
- Twist the cap firmly back onto the bottle.
- Flip open the cap lid.
- With the ink bottle upside down, place the top of the ink bottle on the tank spout.
- Do not squeeze the ink bottle or overfill the ink tank.
- Gently push down.
- Ink drains from the bottle into the ink tank.
- If the bottle does not start draining ink, remove the bottle, then push the bottle onto the ink spout again.
- Fill ink up to the maximum fill marker.
- To prevent leaks, do not exceed the maximum fill marker.
- Close the ink bottle lid and set the bottle aside.
- Push the ink tank plug back into its slot to seal the tank.
- Make sure the plug is pressed firmly into place.
- Repeat these steps to refill any other low or empty tanks.
- Close the ink tank lid.
- Your printer is full of ink and ready to print.

#HP #HPSupport #HPDeskJet

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

Refilling the Ink Tanks on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, deskjet 5810, deskjet 5820, refill, ink tanks, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, h...Refilling the Ink Tanks on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP

Share:

How To Print in Quiet Mode on HP Printers | HP Printers | HP

Learn how to print in quiet mode on HP Printers. For more information about printing in quiet mode, visit our support site: https://support.hp.com/us-en/document....

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to print in quiet mode on HP Printers:
- On your printer control panel, navigate to and touch Setup.
- Touch Preferences.
- Touch Quiet Mode, and then enable the option.
- Touch OK to start noise-sensitive printing.
- To run Quiet Mode only at specified times, turn on Schedule.
- To change the scheduled time, touch Time, and then touch Yes.
- Set the start time, and then touch Next.
- Set the end time, and then touch OK.
- Quiet Mode runs on the new schedule.
- When printing from your computer or mobile device, open the Printer Properties or Printing Preferences, and select printing on plain paper with normal print quality.

#HP #HPSupport #HPPrinters

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

How To Print in Quiet Mode on HP Printers | HP Printers | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, help, learn, How To Print in Quiet Mode on HP Pr...How To Print in Quiet Mode on HP Printers | HP Printers | HP

Share:

Replacing the Printheads on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP

Learn how to replace the printheads on the HP DeskJet GT 5810 and 5820 printers. Replace printheads that are damaged or no longer functioning properly.

Learn more about replacing printheads on HP DeskJet GT 5810 and 5820 printers on our support site: http://support.hp.com/us-en/document/...

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.

Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to replace the printheads on the HP DeskJet GT 5810 and 5820 printers:
- If one printhead needs to be replaced, you must replace both printheads at the same time, or an error will occur.
- First, power on the printer.
- Extend the input tray.
- Load plain white paper into the input tray.
- Adjust the paper width guide so it touches the edge of the paper.
- Check the ink tanks to make sure all of the ink levels are above the minimum fill line.
- Close the output tray extender, then rotate the output tray to the left to close it.
- Make sure the ink valve is unlocked.
- Open the exterior door,
- Open the printhead access door.
- Manually move the carriage to the access area in the center of the printer.
- Push down on the blue carriage latch to open the lid.
- Press down on the tri-color printhead to release it, then pull the printhead out of the slot.
- Hold the printhead upright to avoid getting ink on other surfaces, and do not touch the printhead towers because they could contain residual ink.
- Next, press down on the black printhead to release it, then pull the printhead out of the slot.
- Open the package and remove the tri-color printhead.
- Pull the orange plug straight up from the top.
- Pull the protective tape using the orange pull tab.
- Do not touch the copper colored contacts or ink nozzles. Touching the contacts or nozzles can result in clogs, ink failure, and bad electrical connections.
- Slide the printhead at an upward angle into the left slot,
- Then push on it until it snaps into place.
- Open the package and remove the black printhead.
- Pull the orange plug straight up from the top.
- Pull the protective tape using the orange pull tab.
- Slide the printhead at an upward angle into the right slot,
- Then push on it until it snaps into place.
- Both printheads must be replaced at the same time to avoid printing issues.
- Close the blue carriage latch by pushing it down until it snaps into place.
- The carriage latch must be closed to prevent damage to the printer.
- Do not open the blue carriage latch after the printheads are installed.
- Opening the latch might result in ink system errors.
- Close the printhead access door.
- Close the exterior door.
- Pull out the output tray, then raise the tray extender.
- After the printheads are installed, you must align the printheads and prime the ink system.
- Do not disconnect the power cord or move the printer during the priming process.
- When you see the blinking P on the printer’s control panel, press the Resume button for three seconds.
- The alignment starts when a blinking A appears on the control panel.
- An alignment page prints.
- Lift the scanner lid, then place the alignment page, print side down, on the right front corner of the scanner glass.
- Close the scanner lid.
- On the control panel, press the Start Color Copy button.
- The page scans and the printer aligns the printheads.
- After the printheads are aligned, the printer starts the ink priming process.
- This process can take up to 45 minutes.

#HP #HPSupport #HPDeskJet

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

Replacing the Printheads on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, deskjet gt 5810, deskjet gt 5820, printhead, replace, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, sup...Replacing the Printheads on the HP DeskJet GT 5810 and 5820 Printers | HP DeskJet | HP

Share:

HP Accessibility Assistant Voice Commands | HP Printers | HP

Learn how to use the HP Accessibility Assistant Voice Commands. Perform copy jobs, change accessibility settings, and use pre-defined Auto Quicksets using Voice Command with the HP Accessibility Assistant.

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to use the HP Accessibility Assistant Voice Commands:
- The HP Accessibility Assistant requires the printer language set to English, and all Voice Commands must be spoken in English.
- Copy documents or photos using the Voice Command button on your HP LaserJet MFP with the HP Accessibility Assistant installed.
- Load the document to copy face-up in the ADF, or face-down on the scanner glass.
- Use the guides on the scanner glass to place the document in the correct location.
- On the HP Accessibility Assistant, press the Voice Command button, and wait for the ding sound.
- Say the copy function you want to perform, including any copy settings in the same command.
- The HP Accessibility Assistant repeats the request back to you, and then asks you to confirm the request is correct.
- Wait for the ding sound, and then respond.
- If the information is correct, say “Yes” or “Correct”.
- The HP Accessibility Assistant says, “Preparing Job.”
- If the information repeated back to you is not correct, you can edit or cancel the original command.
- Press the Voice Command button, and wait for the ding sound.
- Say the copy function you want to perform.
- The HP Accessibility Assistant repeats the request back to you, and then asks you to confirm the request is correct.
- Wait for the ding sound, and then respond.
- To edit the original command, say “No”, followed by the voice command you want to use.
- The HP Accessibility Assistant repeats the request back to you, and then asks you to confirm the request is correct.
- Wait for the ding sound, and then respond.
- To cancel the command, say “Cancel”.
- Change Accessibility settings using the Voice Command button on your HP LaserJet MFP with the HP Accessibility Assistant installed.
- Press the Voice Command button, and wait for the ding sound.
- Say the name of the setting you want to change, followed by the command.
- The HP Accessibility Assistant repeats the request back to you.
- After the ding sound, the settings are adjusted according to your command.
- Keep in mind, adjusting settings does not change the default settings.
- Default settings restore at the end of each user session.
- To set additional options, press the Voice Command button again, and wait for the ding sound.
- Use the Voice Command button to activate pre-defined Auto Quicksets on your HP LaserJet MFP with the HP Accessibility Assistant installed.
- Load the document to copy face-up in the ADF, or face-down on the scanner glass.
- Use the guides on the scanner glass to place the document in the correct location.
- To initiate a saved Auto Quickset, press the Voice Command button, and wait for the ding sound.
- Say “Auto Quickset”, followed by the Auto Quickset number.
- The HP Accessibility Assistant repeats the request back to you, including the Auto Quickset description, if defined.
- After the ding sound, the printer pulls the original document into the printer and completes the Auto Quickset request.
- For more information on using the HP Accessibility Assistant, refer to the HP Accessibility Assistant User Guide or go to hp.com/support/HPAA.

#HP #HPSupport #HPPrinters

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

HP Accessibility Assistant Voice Commands | HP Printers | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, help, learn, HP Accessibility Assistant, HPAA, V...HP Accessibility Assistant Voice Commands | HP Printers | HP

Share:

HP Accessibility Assistant Button Functions | HP Printers | HP

Learn how to use the HP Accessibility Assistant buttons to navigate the control panel and perform different printer functions.

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to use the HP Accessibility Assistant buttons:
- Press the Screen Reader button to activate a screen reader who narrates control panel information –
- “Screen reader on. Start Quick Copy.”
- Press the Screen Reader button again to turn off the screen reader.
- “Screen reader off.”
- Press the Quick Access Accessibility button to launch a shortcut to the printer Accessibility menu, where you can access features including High Contrast and Screen Zoom.
- Keep in mind, adjusting settings does not change the default settings.
- Default settings restore at the end of each user session.
- Press the Previous or Left arrow button to move the current focus to the previous item.
- Hold the button for two or more seconds to move the focus to the first element on the screen.
- Press the Circle button in the center of the HP Accessibility Assistant to select an option, or choose OK.
- Press the Next or Right arrow button to move the current focus to the next item.
- Hold the button for two or more seconds to move the focus to the last element on the screen.
- Use the Back button to close the on-screen keyboard.
- Collapse open panels on the right side of the control panel,
- return to an application home page, or return the focus to the default control.
- Press the Home button at any time to return to the top application menu or to the main Home screen.
- When Copy, Start, or Send display on the control panel, pressing the Start button activates the function.
- Pressing Start on the main screen activates Quick Copy Start.
- Use voice commands to perform copy jobs, change accessibility settings, and use predefined Auto Quicksets.
- With the original document loaded in the automatic document feeder or scanner glass, press the Voice Command button.
- Say the copy function you want to perform, including any copy settings in the same command.
- The HP Accessibility Assistant repeats the request back to you and then asks you to confirm the request is correct.
- Wait for the ding sound, and then respond.
- The HP Accessibility Assistant says, “Preparing job” and then pulls the original document into the printer and completes the copy request.
- On the left side of the HP Accessibility Assistant, there are three additional functions.
- The two buttons control volume.
- Press the bottom button to decrease the volume, and press the top button to increase the volume.
- Keep in mind, adjusting the volume does not change the default settings.
- Default settings restore at the end of each user session.
- Above the volume buttons is a 3.5-millimeter headset jack.
- Plug a headset or headphones with a 3.5-millimeter input into the jack to allow for privacy of navigation and narration during use.
- For headphones without a microphone, continue speaking voice commands directly to the HP Accessibility Assistant.
- For headsets with a microphone, the HP Accessibility Assistant microphone is automatically disabled, and commands are received through the headset.
- For more information on using the HP Accessibility Assistant, refer to the HP Accessibility Assistant User Guide or go to hp.com/support/HPAA.

#HP #HPSupport #HPPrinters

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

HP Accessibility Assistant Button Functions | HP Printers | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, help, learn, how to use the HP Accessibility Ass...HP Accessibility Assistant Button Functions | HP Printers | HP

Share:

HP Accessibility Assistant Installation | HP Printers | HP

Learn how to install the HP Accessibility Assistant on your HP LaserJet MFP in the HIP2, or Hardware Integration Pocket, or attach it to the printer using a USB cable.

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to install the HP Accessibility Assistant:
- From the home screen of the printer control panel, navigate to Reports, and then navigate to view or print a Configuration Page to check the firmware version.
- Go to support.hp.com/drivers to download any available software or drivers for your HP printer.
- The HP Accessibility Assistant requires the printer language set to English, and all Voice Commands must be spoken in English.
- Unpack and remove all supplies from the box.
- A small, flat bladed screwdriver is required for installing the HP Accessibility Assistant in the HIP2 pocket, but does not come inside the box.
- Press the Power button to turn off the printer.
Follow these steps to install the HP Accessibility Assistant in the HIP2 Pocket.
- On the HIP2 cover, slide the flat tip of the screwdriver into the gap, and then lift the cover and remove it from the HIP2 pocket.
- From the unboxed materials, select the shorter of the two USB cables.
- On the back of the HP Accessibility Assistant, locate the connection port.
- Slide the six pin connector end of the USB cable into the port.
- Inside the HIP2 pocket, slide the other end of the cable into the USB port.
- Position the HP Accessibility Assistant so the buttons face up and the volume controls face away from the printer control panel, and then install it into the HIP2 pocket until it snaps into place.
- Press the Power button to turn on the printer.
- This completes installing the HP Accessibility Assistant in the HIP2 pocket.
Follow these steps to install the HP Accessibility Assistant using an external USB port on the printer.
- From the unboxed materials, select the longer of the two USB cables.
- On the back of the HP Accessibility Assistant, locate the connection port.
- Slide the six pin connector end of the USB cable into the port.
- From the unboxed materials, select the back cover plate and align the cable guide into the notch on the back.
- Press the back cover plate firmly until it snaps into place.
- From the unboxed materials, use the Velcro strips to attach the HP Accessibility Assistant to the printer.
- For each Velcro strip, peel off the backing and attach it to a rubber foot on the back cover plate.
- Peel off the remaining backing on the Velcro strips, and then press the HP Accessibility Assistant down firmly to attach it to the side or the top of the printer.
- On the printer, connect the other end of the cable into any available USB port.
- Press the Power button to turn on the printer.
- This completes installing the HP Accessibility Assistant to the printer through an external USB port.
- For more information on using the HP Accessibility Assistant, refer to the HP Accessibility Assistant User Guide or go to hp.com/support/HPAA.

#HP #HPSupport #HPPrinters

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

HP Accessibility Assistant Installation | HP Printers | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, help, learn, how to install the HP Accessibility...HP Accessibility Assistant Installation | HP Printers | HP

Share:

How To Update Your Account Information in HP Connected | HP Printers | HP

This video has been updated: https://youtu.be/jKaSfT11VqE

Learn how to update your account information in HP Connected. For more information on updating your HP Connected account information, visit our support site https://support.hp.com/us-en/document....

For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport

Follow these steps to update your account information in HP Connected:
- On your computer or mobile device, go to hpconnected.com, and then select Sign In.
- Enter the email address and password for your HP Connected account, and then select Sign In.
- In the upper-right corner, select your account name, and then select Settings.
- Select Edit next to an account setting, and then update your information.
- Select Save Changes for each modified setting and your HP Connected account information is updated.


This video was produced by HP

#HP #HPSupport #HPPrinters

SUBSCRIBE: http://bit.ly/PrinterSupport

SHOP NOW: http://store.hp.com/us/en/

About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.

Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp

This video was produced by HP.

How To Update Your Account Information in HP Connected | HP Printers | HP
https://www.youtube.com/user/HP

Palavras-chave desta postagem

yt:cc=on, HP, Hewlett Packard, troubleshooting, tutorial, howto, diy, electronics, printer, how to, support, help, learn, HP Connected Account, update accoun...How To Update Your Account Information in HP Connected | HP Printers | HP

Share: