How To Load and Print With Rigid Materials on the HP Latex R Printer Series | HP Latex | HP
Learn how to load and print with rigid materials on the HP Latex R Printer Series.
For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to load and print with rigid materials on the HP Latex R Printer Series:
- From the IPS, or Internal Print Server, touch the Substrate application.
- The substrate window opens.
- Select your substrate.
- Set the parameters for printing.
- Check the auto-measurement options for the substrate.
- Touch Load.
- When prompted, load the substrate into the printer.
- Make sure the print area is clear before printing.
- From the input side of the printer, push down the left alignment bar.
- Place the substrate on the substrate-advance belt and align it against the front and left alignment bars.
- You must use flat, unused substrate for print jobs.
- Bent, wrinkled, or torn substrates can cause jams.
- Select Substrate ready on the printer or from the Internal Print Server.
- Wait for the verification checks to complete.
- You must manually enter the substrate length.
- Touch Apply.
- In the IPS, go to the queue management window.
- Drag and drop the job to be printed.
- Touch Print to begin printing the job.
#HP #HPSupport #HPLatex
SUBSCRIBE: http://bit.ly/PrinterSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How To Load and Print With Rigid Materials on the HP Latex R Printer Series | HP Latex | HP
https://www.youtube.com/user/HP
No comments:
Post a Comment