How To Perform Monthly Maintenance on the HP Latex R Printer Series | HP Latex | HP
Learn how to perform Monthly Maintenance on the HP Latex R Printer Series.
For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to perform Monthly Maintenance on the HP Latex R Printer Series:
- From the IPS, or Internal Print Server, touch Maintenance.
- Select Clean the drop-detector rods, Clean the substrate-advance belt, and Clean the bottom of the carriage, the line sensor and the crash sensor.
- Then touch Start to view instructions for the maintenance process.
- Follow these steps to clean the drop detector rods.
- Open the carriage cover.
- Manually move the carriage to the left.
- Dampen a lint-free cloth with distilled water.
- Clean the drop detector rods with the cloth until all ink is cleaned.
- Close the carriage cover.
- Follow these steps to clean the substrate-advance belt.
- Lower the alignment bar.
- Remove the standard extension tables.
- Pour a latex solvent liquid over the dried ink.
- Use a brush to remove the ink from the belt.
- Use a lint-free cloth to finish cleaning the zone.
- Move the belt backward and forward to clean all through the belt, repeating the process when needed.
- Follow these steps to clean the bottom of the carriage, the line sensor, and the crash sensor.
- Use the IPS to move the carriage beam to its highest position.
- Move the carriage to the left until it reaches the ink delivery system side of the printer.
- Turn off the printer and the main switch.
- Remove the rear ink delivery system cover to access the bottom of the carriage.
- Clean the sides of the printheads with a lint-free cotton swab dampened with distilled water.
- Use another cotton swab to clean the optimizer printhead.
- Clean the bottom of the carriage with a lint-free cloth dampened with distilled water.
- Do not touch the printheads.
- Wipe the line sensor with another cotton swab dampened with isopropyl alcohol.
- Wait three or four minutes for the alcohol to evaporate completely.
- Manually move the carriage to the left until both crash sensors are reachable.
- Use a lint-free cloth dampened with distilled water to clean the sensors.
- Wait three or four minutes for the water to evaporate completely.
- Reinstall the rear ink delivery system cover.
- Close all doors and covers.
- Turn on the printer and main switch.
- The carriage automatically returns to the service station.
#HP #HPSupport #HPLatex
SUBSCRIBE: http://bit.ly/PrinterSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How To Perform Monthly Maintenance on the HP Latex R Printer Series | HP Latex | HP
https://www.youtube.com/user/HP
No comments:
Post a Comment