How To Print With White Ink on the HP Latex R Printer Series | HP Latex | HP
Learn how to print with white ink on the HP Latex R Printer Series.
For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to print with white ink on the HP Latex R Printer Series:
- Prepare a job in the RIP by selecting the desired print mode.
- Overflood if you want the white layer printed on top of the colored layer.
- Underflood if you want the white layer printed under the colored layer.
- Spot if you want the white ink printed at the same time and in the same way as the other inks.
- If you do not select a layer as white, the job surface fills the entire surface in white, following the print mode you chose.
- Open the IPS, and then go to the Queue management screen.
- Load the prepared job.
- Touch Print.
- White ink is more dense than other ink and tends to settle over time.
- The printer has a recirculation system that moves white ink constantly to avoid printhead damage.
- For periods of time when you are not using white ink, store the white ink printheads in the white printhead maintenance wheel.
- Open the printhead cleaning roll door.
- On the white printhead maintenance wheel, press the Stop button to stop all wheel movement.
- With the wheels off, remove the two printhead storage boxes.
- Open each storage box and remove the auxiliary white printhead.
- From the IPS, touch Replace.
- Open the carriage cover.
- Remove the two white printheads from the carriage.
- Open the storage boxes, and place the white printheads in the boxes, using the labels for reference.
- Place both storage boxes back into the wheel.
- Press the Wheel button to turn on the wheel.
- Install each auxiliary white printhead into the carriage in place of the white printheads.
- Use the labels to verify correct placement.
- Install the auxiliary white printhead vertically in the same direction as the fluid interconnector to avoid damage to the printhead and printer.
- Close the carriage cover.
#HP #HPSupport #HPLatex
SUBSCRIBE: http://bit.ly/PrinterSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How To Print With White Ink on the HP Latex R Printer Series | HP Latex | HP
https://www.youtube.com/user/HP
No comments:
Post a Comment