How To Replace the Crash Sensor Legs on the HP Latex R Printer Series | HP Latex | HP
Learn How to replace the Crash Sensor Legs on the HP Latex R Printer Series..
For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to replace the Crash Sensor Legs on the HP Latex R Printer Series:
- From the IPS, or Internal Print Server, touch Maintenance.
- From the IPS, touch Replace Crash Sensor Leg, and then touch Start.
- The screen displays instructions for the replacement process.
- Turn off the printer and the main switch.
- Open the carriage cover.
- Slide the carriage to the right until it stops.
- On the front crash sensor leg, use a screwdriver to loosen the two screws securing the silver bracket, and then remove it.
- Loosen the screw that holds the yellow cover, and then remove it.
- Slide the carriage to the left.
- Making sure not to touch the printhead cleaning roll, turn the crash sensor leg forty-five degrees to the left, and then remove it.
- Align the new leg at a forty-five-degree angle, and then install it.
- Reinstall the silver bracket and tighten the screws to secure it.
- Reinstall the yellow cover and tighten the screw to secure it.
- Slide the carriage to the right until it stops.
- To replace the rear crash sensor leg, loosen the screw that holds the yellow cover, and then remove it.
- Turn the leg counterclockwise and remove it.
- Install the new leg horizontally.
- When correctly in place, turn it clockwise to tighten it.
- Reinstall the yellow cover and tighten the screw to secure it.
- Turn on the printer and main switch.
#HP #HPSupport #HPLatex
SUBSCRIBE: http://bit.ly/PrinterSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
How To Replace the Crash Sensor Legs on the HP Latex R Printer Series | HP Latex | HP
https://www.youtube.com/user/HP
No comments:
Post a Comment